PIKA Mosport 1E-F, Руководство по установке оборудования, Страница: 31 / 64

Management Choices Hardware Installation Guide
Mosport 1TE/2TE 21

To trigger the Factory Reset:
1. Power the Mosport 1TE/2TE off.
2. Insert a small, unbent paper clip into the RESET/DEFAULT hole located at the rear of the Mosport
1TE/2TE. While pressing the RESET/DEFAULT button, restart the unit.
Do not depress before the LEDs stop blinking and are steadily ON.
3. Release the paper clip.
The Mosport 1TE/2TE restarts.
This procedure resets all variables in the MIB modules to their default value.
When the Mosport 1TE/2TE has finished its provisioning sequence, it is ready to be used with a
DHCP-provided IP address and MIB parameters.
This procedure can also be performed at run-time.
Management Choices
Congratulations for properly installing the Mosport 1TE/2TE. You can now configure the software parameters
of the unit.
The Mosport 1TE/2TE offers various management options. All these options are described in the Dgw
Software Configuration Guide .
Note:
The Factory reset alters any persistent configuration data of the Mosport 1TE/2TE.
Table 13: Management Options
Management Choice Features
Web GUI The Mosport 1TE/2TE web interface allows you to configure the following
information:
• Network attributes
• SIP parameters
• VoIP settings
• Management settings such as configuration scripts, restore / backup,
etc.
SNMPv1/2/3 The Mosport 1TE/2TE SNMP feature allows you to configure all the MIB services.
Command Line
Interface (CLI) The Mosport 1TE/2TE CLI feature allows you to configure all the MIB services.
Unit Manager
Network The UMN offers the following:
• Auto-discovery
• Group provisioning
• SNMP access and remote management.