PIKA Mosport 1E-F, Руководство по установке оборудования, Страница: 11 / 64

Mosport 1TE/2TE 1
C
H A P T E R
1
Overview
This chapter describes the Mosport 1TE/2TE connectors and indicators.
Overview
Provider-specific profiles ensure that the Mosport 1TE/2TE is a genuine plug and play solution. It offers a low
total cost of ownership as it reduces installation and maintenance costs.
The Mosport 1TE/2TE series ISDN VoIP Digital Gateways allow enterprises to lower communications costs
over any IP link. Designed specifically for enterprise applications, the Mosport 1TE/2TE digital gateways make
use of existing broadband access equipment to connect to any standards-based VoIP network.
The Mosport 1TE/2TE digital gateways meet the requirements of enterprises that want to connect their ISDN
equipment, such as PBXs, through a PRI (Primary Rate Interface) interface to an IP network or as a gateway
to the PSTN.
Mosport 1TE/2TE digital gateways provide transparent ISDN port extensions over an IP network. The remote
ISDN terminals can be managed centrally and benefit from PBX services such as calling groups and voice
mail.
The following are the Mosport 1TE/2TE Series models currently available:
Key Features

Up to 60 simultaneous calls

ISDN BRI and T1/E1 PRI interface ports

R2 CAS E1 interface ports

HTTP, SNMP, FTP and TFTP for configuration and management

True Plug-and-Play

Automatic configuration script download

Call Routing service

SNMPv3 and web management

DHCP Client

PPPoE Client

T.38 support

Command Line Interface (CLI)
Table 3: Mosport 1TE/2TE Models
Model Interfaces VoIP Calls Capacity Service Slot Used
Mosport 1E-F 1xE1-PRI interface up to 15 Slot 2
Mosport 2E-F 2xE1-PRI interface up to 39 Slot 2 and 3
Mosport 1TE 1xE1/T1-PRI interface up to 30 Slot 2
Mosport 2TE 2xE1/T1-PRI interface up to 60 Slots 2 and 3