PIKA Mosport 1E-F, Руководство по установке оборудования

Страница: 20 / 64

Chapter 2 - Installation Location and Mounting Requirements
10 Mosport 1TE/2TE
You may also need additional 10/100 BaseT Ethernet RJ-45 cables.
Location and Mounting Requirements
The Mosport 1TE/2TE is suitable for use in an office environment where it can be placed in the same room or
cabinet where the PBX/telephony equipment is located. The unit can be wall-mounted, mounted on a standard
48.26 cm (19 in.) equipment rack, or free standing. In addition, the Mosport 1TE/2TE can be rack-mounted in
a wiring closet or equipment room.
Location
Install the Mosport 1TE/2TE in a well-ventilated location where it will not be exposed to high temperature or
humidity. Do not install the Mosport 1TE/2TE in a location exposed to direct sunlight or near stoves or
radiators. Excessive heat could damage the internal components.
When deciding where to position the Mosport 1TE/2TE, ensure that:

The Mosport 1TE/2TE is accessible for future upgrade, maintenance and troubleshooting, and
cables can be easily connected.

The cabling is away from the following:
• Sources of electrical noise such as radios, transmitters, and broadband amplifiers.
• Power lines and fluorescent lighting fixtures.
• Water or moisture that could enter the casing of the Mosport 1TE/2TE.

The fan on the Mosport 1TE/2TE is not blocked or that the rear of the unit is not too close to
the wall. The unit requires a minimum of 25 mm (1 in.) clearance.

The operating temperature is between 0
o
C and 40
o
C.

The humidity is not over 85% and is non-condensing.
Wiring Requirements
Make sure that the telephone wiring, LAN and WAN cables reach the device and can be dressed in a manner
that is safe for the wiring, does not pull or create lateral stress on the connectors on the device, and does not
present a trip hazard to personnel working in the vicinity of the equipment. Do not connect any cable or wiring
at this time.
Mounting Brackets
The Mosport 1TE/2TE ships with two brackets for rack-mount installation in a 19-inch rack or wall-mount
installation.
Figure 7: Mounting Bracket
Warning:
To prevent fire or shock hazard do not expose the unit to rain or moisture.