PIKA Mosport 1E-F, Руководство по установке оборудования

Страница: 14 / 64

Chapter 1 - Overview Mosport 1TE/2TE Connectors and Indicators
4 Mosport 1TE/2TE
Figure 2: PRI Models Slot Sections
Figure 3 shows the rear panel of the Mosport 1TE/2TE.
Figure 3: PRI Models Rear Panel Connectors
Table 6: PRI Models Rear Panel Connectors
Connector Description
1. On/Off
Switch Turns the Mosport 1TE/2TE on or off.
2. Power
connector Standard universal input (100-240 VAC; 50-60 Hz; 2A) power supply.
3. Fan Variable speed fan. The noise level complies with the ETSI 300 753 standard
(63 dB for office, 75 dB for telecom environment).
4. Reset
Default
button Resets configuration parameters of the Mosport 1TE/2TE to default (known)
values. It can be used to reconfigure the unit. See
“RESET/DEFAULT Button” on
page 19 for more details.
WAN/LAN Slot
5. ETH 1-4 Four 10/100 BaseT Ethernet RJ-45 connectors for access to a LAN. See “WAN/
LAN Slot – Ethernet Connectors” on page 6 for more details.
Note : These connectors are only used to contact the unit on the LAN side.
6. ETH 5 One 10/100 BaseT Ethernet RJ-45 connector for access to a WAN. See “WAN/
LAN Slot – Ethernet Connectors” on page 6 for more details.
Service Slot 2
7. E1 / T1 One RJ-45 connector offering E1/T1 ISDN connectivity. See “Service Slots 2/3 –
PRI Connector” on page 6 for more details.
Service Slot 3
8. E1 / T1 One RJ-45 connector offering E1/T1 ISDN connectivity. See “Service Slots 2/3 –
PRI Connector” on page 6 for more details.
Slot 3
Slot 2
Slot 1
WAN/LAN Slot
1
2
3
5
6
4
7
8