PIKA Mosport 1E-F, Руководство по установке оборудования, Страница: 15 / 64

Mosport 1TE/2TE Connectors and Indicators Hardware Installation Guide
Mosport 1TE/2TE 5
Rear Indicators
All LEDs located on the front panel are also duplicated on the rear of the Mosport 1TE/2TE, which allows you
to rack-mount the unit with the front or rear facing forwards. See
“Location and Mounting Requirements” on
page 10 for more details.
Figure 4: PRI Models Rear Panel Indicators
Table 7: PRI Models Rear Panel LEDs
LED Description
1. POWER/
UPS Indicates the status of the power feeding:
• Green: The Mosport 1TE/2TE is powered by its power supply.
• Yellow: The Mosport 1TE/2TE is powered by an external UPS.
2. LAN Two indicators directly incorporated into each LAN connector that provide the state
of the LAN network connected to it:
• Green LED: The Mosport 1TE/2TE uses a 10 Mbps connection.
• Yellow LED: The Mosport 1TE/2TE uses a 100 Mbps connection.
The LEDs remain ON to indicate a Link and blink if traffic passes.
3. WAN Provides the state of the WAN network connected to the ETH 5 connector:
• Green: The Mosport 1TE/2TE uses a 10 Mbps connection.
• Yellow: The Mosport 1TE/2TE uses a 100 Mbps connection.
The LED remains ON to indicate a Link and blinks if traffic passes.
4. ERROR/
ALARM This LED is not currently used on the Mosport 1TE/2TE.
5. Wi-Fi This LED is not currently used on the Mosport 1TE/2TE.
6. IN USE When lit, at least one of the channels of the E1/T1 connector of Service Slot 2 is in
use.
7. ERROR/
TROUBLE This LED is not currently used on the Mosport 1TE/2TE.
8. LINK Indicates the state of the ISDN network connected to this connector:
• Yellow LED: The connection has a Loss of Signal (LOS).
• Green LED: The connection works properly.
9. IN USE When lit, at least one of the channels of the E1/T1 connector of Service Slot 3 is in
use.
10. ERROR/
TROUBLE This LED is not currently used on the Mosport 1TE/2TE.
3
1
2
4
9
5
10
6
7
8
11
10 Mbps
Connection 100 Mbps
Connection