phytron TM StepDrive 1x24..48V/5A, Руководство пользователя

Страница: 12 / 92

phytron
11 MA 1303-A007 EN
2 To Consider Before Installation
Read this manual very carefully before installing and operating the TM StepDrive.
Observe the safety instructions in the following chapter!
2.1 Qualified Personnel
Design, installation and operation of systems using the TM StepDrive may only
be performed by qualified and trained personnel.
These persons should be able to recognize and handle risks emerging from elec-
trical, mechanical or electronic system parts.
The qualified personnel must know the content of this manual and be able to un-
derstand all documents belonging to the product. Safety instructions are to be
planned.
The trained personnel must know all valid standards, regulations and rules for the
accident prevention of accidents, which are necessary for working with the
product.
WARNING
Without proper training and qualifications, damage to devices and injury might
result!
2.2 Safety Instructions
i The TM StepDrive is designed for operating in a SIMATIC
®
ET 200
®
SP System.
An installation is allowed only if the requirement of the EC Machine Directive and
EMC are conformed with. See chap.1.4.
i
This product is used as a part of a complete system, therefore risk evaluations
concerning the specific application must be made before using the product. Safe-
ty measures have to be taken according to the results and be verified.
Personnel safety must be ensured by the concept of this complete system
(e.g. machine concept).
i
In any application, the reliability of operation of the software products can be im-
paired by adverse factors, e.g. differences in electrical power supply or, computer
hardware malfunctions.
To avoid damage by system failures the user must take appropriate safety
measures, including back-up or shutdown mechanism.