Phoenix Contact 2702772 Скачать руководство пользователя страница 39

Страница: 39 / 90

Configuration and startup

3785_en_B

PHOENIX CONTACT

the “Transfer mode to PLC” field is selected, this setting specifies the size of the data block

used in the corresponding input assembly instance. The length of the corresponding

instance is equal to (RX data packet size + 4 bytes).

Maximum TX packet size:

Specifies the size of the data block used in the corresponding

output assembly instance. The length of the corresponding instance is equal to

TX data packet size + 4 bytes

Oversized packets:

Specifies how to process oversized received packets. Set the “Max

packet size” field to the desired size and the packet is truncated. Alternatively, the packet

may be dropped.

RX produced data tag name:

Enter the PLC tag or file name in this field. This designates

where to write received data when

Write to Tag/File

option is selected. This field supports

a name containing up to 40 characters. The “Tag/file” name must be a global variable in the

PLC. Enter the tag/file name exactly as it is in the PLC. A MicroLogix type file name must be

N10 or greater and have the format N10:0.

Advanced configuration

Enable TX sequence number check:

If enabled, the sequence number is checked and

messages are only transmitted if the sequence number is incremented from the previous

sequence number. When a duplicate sequence number is received and the “Transfer mode

from PLC” field is set to

Write Msg

, the message is rejected and the “Duplicate Transmit

Sequence Error Count” counter increments. When a duplicate sequence number is

received and the “Transfer mode from PLC” field is set to

Class 1

, the message is ignored.

In either case, if a message is received with an unexpected sequence number that is not a

duplicate or an incremented sequence number, the “Unexpected Transmit Sequence Error

Count” counter increments. If disabled, all transmit messages are transmitted regardless if

the sequence number has been incremented or not.

Disable RX queue (to PLC):

Select this option to only receive the last received data

packet. If two or more packets are received during the “Maximum PLC Update Rate” time

period, only the last received data packet is returned.

Receive MicroLogix MSB first:

Enable this option when the GW EIP/ASCII... should

receive the most significant byte (MSB) of a 16-bit integer first. This option is disabled by

default and the least significant byte (LSB) is received first.

Transmit MicroLogix MSB first:

Enable this option when the GW EIP/ASCII... should

transmit the most significant byte (MSB) of a 16-bit integer first. This option is disabled by

default and the least significant byte (LSB) is transmitted first.

This setting is only used when

Class 1

is selected in the “Transfer mode to PLC” field.

The

Polling method

does not use this attribute.

Содержание 2702772



























































































Результаты поиска

Содержание 2702772

Отзывы:

Похожие инструкции для 2702772

Бренды по названию

Популярные бренды

Phoenix Contact 2702772, Руководство пользователя

Результаты поиска

Содержание 2702772

Отзывы:

Похожие инструкции для 2702772

Бренды по названию

Популярные бренды