Phoenix Contact 2702772 Скачать руководство пользователя страница 15

Страница: 15 / 90

Installation

3785_en_B

PHOENIX CONTACT

Installation

3.1

Safety regulations and installation notes

Installation, operation, and maintenance may be carried out only by qualified electricians.

Follow the specified installation instructions. The applicable specifications and safety

directives (including the national safety directives), as well as the general technical

regulations, must be observed during installation and operation. The technical data should

be taken from the packaging instructions and the certificates (conformity assessment, other

possible approvals).

Opening the device or making changes to it is not permitted. Do not repair the device

yourself, but replace it with an equivalent device. Repairs may be carried out only by the

manufacturer. The manufacturer is not liable for any damage caused by violation of the

prescribed regulations.

The IP20 degree of protection (EN 60529) of the device is intended for a clean and dry

environment.

Do not subject the device to any load that exceeds the prescribed limits.

The device is not designed for use in environments with danger of dust explosions.

3.2

Mounting

To mount on the DIN rail:

Place the device onto the DIN rail from above (A), so that the upper housing keyway

hooks onto the top edge of the DIN rail.

Hold the device by the housing cover and carefully push the device toward the

mounting surface (B).

After the foot is snapped onto the DIN rail, verify that it is attached securely.

Figure 3-1

DIN rail mounting

Содержание 2702772



























































































Результаты поиска

Содержание 2702772

Отзывы:

Похожие инструкции для 2702772

Бренды по названию

Популярные бренды

Phoenix Contact 2702772, Руководство пользователя

Результаты поиска

Содержание 2702772

Отзывы:

Похожие инструкции для 2702772

Бренды по названию

Популярные бренды