Phoenix Contact 2702772 Скачать руководство пользователя страница 89

Страница: 89 / 90

PHOENIX CONTACT

89/90

Please observe the following notes

General terms and conditions of use for technical documentation

Phoenix Contact reserves the right to alter, correct, and/or improve the technical

documentation and the products described in the technical documentation at its own

discretion and without giving prior notice, insofar as this is reasonable for the user. The

same applies to any technical changes that serve the purpose of technical progress.

The receipt of technical documentation (in particular user documentation) does not

constitute any further duty on the part of Phoenix Contact to furnish information on

modifications to products and/or technical documentation. You are responsible to verify the

suitability and intended use of the products in your specific application, in particular with

regard to observing the applicable standards and regulations. All information made

available in the technical data is supplied without any accompanying guarantee, whether

expressly mentioned, implied or tacitly assumed.

In general, the provisions of the current standard Terms and Conditions of Phoenix Contact

apply exclusively, in particular as concerns any warranty liability.

This manual, including all illustrations contained herein, is copyright protected. Any

changes to the contents or the publication of extracts of this document is prohibited.

Phoenix Contact reserves the right to register its own intellectual property rights for the

product identifications of Phoenix Contact products that are used here. Registration of such

intellectual property rights by third parties is prohibited.

Other product identifications may be afforded legal protection, even where they may not be

indicated as such.

Содержание 2702772



























































































Результаты поиска

Содержание 2702772

Отзывы:

Похожие инструкции для 2702772

Бренды по названию

Популярные бренды

Phoenix Contact 2702772, Руководство пользователя

Результаты поиска

Содержание 2702772

Отзывы:

Похожие инструкции для 2702772

Бренды по названию

Популярные бренды