Phoenix Contact 2702772 Скачать руководство пользователя страница 31

Страница: 31 / 90

Configuration and startup

3785_en_B

PHOENIX CONTACT

4.7.2

EtherNet/IP configuration

The “EtherNet/IP Configuration” page sets how the Raw/ASCII data is transmitted to an

EtherNet/IP controller.

Figure 4-11

“EtherNet/IP configuration” page

EtherNet/IP interface configuration

PLC type:

The GW EIP/ASCII... provides EtherNet/IP connectivity to the entire

ControlLogix family of PLCs as well as the SLC, PLC-5, and MicroLogix PLCs. The

ControlLogix setting supports full CIP interfaces including Class 1, Write to Tag and full

object interface support. The ControlLogix PLC family of PLCs includes the Rockwell

ControlLogix

, FlexLogix, MicroLogix, SoftLogix and other advanced PLCs. This selection

also supports numerous PLCs manufactured by other manufacturers, such Omron

and

Schneider Electric

. The MicroLogix setting provides support for Rockwell MicroLogix,

SLC and PLC-5 PLCs. These PLCs only support a limited EtherNet/IP interface that does

not include Class 1 or full object support. Only Write to File and communication using PCCC

MSG instructions is provided.

Transfer mode to PLC:

Specifies how the Raw/ASCII data will be transferred (via

EtherNet/IP) to the PLC.

–

When

Write to Tag/File

is selected, the GW EIP/ASCII... writes the serial data directly

into a tag or file on the PLC. This option should only be used if the PLC can scan and

consume the serial data faster than the serial device can produce it.

–

When

Class 1

is selected, the GW EIP/ASCII... writes the serial data into a tag or file

on the PLC and provides a mechanism to synchronize the data flow between the PLC

and the GW EIP/ASCII.... Use this method when you want to ensure that the tag or file

is not overwritten before the PLC can consume the data. Class 1 communication is only

applicable to ControlLogix PLCs.

–

Select

Polling

if the PLC will request data on a periodic basis. It provides the ability to

control the received data flow. However, it does require periodic data requests and the

request rate must be fast enough to ensure that the serial port RX queues on the

GW EIP/ASCII... do not overflow.

The default is

Class 1

Содержание 2702772



























































































Результаты поиска

Содержание 2702772

Отзывы:

Похожие инструкции для 2702772

Бренды по названию

Популярные бренды

Phoenix Contact 2702772, Руководство пользователя

Результаты поиска

Содержание 2702772

Отзывы:

Похожие инструкции для 2702772

Бренды по названию

Популярные бренды