Phoenix Contact 2702772 Скачать руководство пользователя страница 75

Страница: 75 / 90

MicroLogix, SLC, and PLC-5 interface

3785_en_B

PHOENIX CONTACT

MicroLogix, SLC, and PLC-5 interface

The MicroLogix, SLC, and PLC-5 interface supports polling and write-to-file receive

communication, PLC writes transmit communication, or PCCC-based messages

transferred by means of the PCCC objects including:

–

SLC Typed Read Message

–

SLC Typed Write Message

–

PLC-5 Typed Read Message (logical ASCII address format)

–

PLC-5 Typed Write Message (logical ASCII address format)

The “Write-to-Tag/File” field in the “Transfer mode to PLC” supports transfers up serial data

packet transfers up to 1518 bytes for serial data and 2048 bytes for socket connections.

Message rates are controlled by setting the “Maximum PLC update rate” field.

Class 1 is not supported when the PLC type is set to MicroLogix. Since the MicroLogix, SLC,

and PLC-5 controllers operate on a file memory system, the

Write to Tag/File

must be

selected in the “Transfer mode to PLC” field. When operating in

Write to Tag/File

mode,

the PLC type must be set to MicroLogix. When configuring the GW EIP/ASCII... to operate

Write to Tag/File

mode, enter the file name starting with the standard file format, i.e.,

N10:0. Polling is performed through the PLC-5/SLC-specific messages instead of

accessing the “Serial Port Data Transfer” object. The maximum serial and socket port

packet sizes in polling mode are smaller due to PCCC-message size limitations.

It is recommended to use the “Write to Tag/File” option in conjunction with the “Maximum

PLC Update Rate” option to send data to a MicroLogix, SLC, or PLC-5 controller. While

ControlLogix PLCs support the SLC and PLC-5 messages, using those messages on

ControlLogix PLCs is not recommended due to data size and performance considerations.

6.1

Requirements

The MicroLogix, SLC or PLC-5 controller must support EtherNet/IP, multihop, and

ControlLogix devices. Table 6-1 lists PLC and firmware that meet these requirements.

NOTE:

Older versions of the PLC firmware may or may not provide EtherNet/IP functionality.

Always verify compatibility that older versions of the PLC firmware provide EtherNet/IP

functionality before using it with a GW EIP/ASCII... device. To update PLC firmware,

contact your Rockwell distributor.

Содержание 2702772



























































































Результаты поиска

Содержание 2702772

Отзывы:

Похожие инструкции для 2702772

Бренды по названию

Популярные бренды

Phoenix Contact 2702772, Руководство пользователя

Результаты поиска

Содержание 2702772

Отзывы:

Похожие инструкции для 2702772

Бренды по названию

Популярные бренды