60
Philips · LaserMFD 6135hfd
EN
Deregistering Cordless Telephone
Deregistering Cordless Telephone
You can deregister a cordless telephone either from the
device or from the cordless telephone. Follow the in-
structions in the operating instructions of the cordless
telephone.
1. Press
C
,
522
and
OK
.
2. Using
[
to select which cordless telephone you
are would like to de-register.
3. Confirm with
OK
. The device disconnects from the
cordless telephone.
Looking for Cordless Telephone
Looking for Cordless Telephone
This function helps you in locating cordless telephones,
which you have misplaced. For this purpose the cordless
telephones must be registered with the device and must
be within its range.
1. Press
C
,
523
and
OK
.
2. All cordless telephones registered with the device
ring for approx. one minute. You can end the search
function by pressing
j
on the device or pressing
the button to hang up on the cordless telephone.
Connecting Additional
Devices
· Connecting Additional Devices
Additional Devices
You can operate additional devices on a telephone line,
such as cordless telephones, answering machines, mo-
dems or charge counters.
Connection to the Device
Connection to the Device
You can connect additional devices directly to your de-
vice. Insert the telephone cable of the additional device
into the
AUX./Ò
socket (RJ-11-connection) on the
device.
Externe Geräte anschließen
Connection to the Telephone Line
Order of Connections
In order for the fax switch to function, the device must
be first in the series if multiple devices are connected to
the same telephone socket. Follow the correct order.
Connection to the First Telephone Socket
Using Additional Telephones
(Easylink)
· Using Additional Telephones (Easylink)
Easylink
With the Easylink function you can control your device
with additional telephones. To use this function, addi-
tional telephones must be set to the tone dialling mode
(DTMF/MFV tones) (for this purpose see the operating
manual of your additional telephone).
Starting Fax Reception
If you pick up at an additional device and hear that you
are receiving a fax (whistling tone or silence), you can
start the fax reception by pressing
*5
on the addi-
tional telephone or pressing
o
on the device.
Hang up Additional Telephone
Hang up the additional telephone when the ring tone
changes. The device has accepted the reception of the
fax message.
Taking Over the Line
If you pick up on an additional telephone and the device
continues to ring or attempts to receive a fax, you can
disconnect the device from the line. Press
**
on
the additional telephone.
Using an External Answering
Machine
· Using an External Answering Machine
Your external answering machine must have parallel
recognition for accepting incoming calls. Consult your
retailer.
For the best operation, the answering machine must be
connected to the
AUX./Ò
socket of the device. Select
EXT/ answering machine mode as the fax reception
mode (see also chapter
Setting the Fax Reception Mode
,
page 54).
Length of Outgoing Message
Answering Machine Records Fax Signals
Connection to the First Telephone
Socket
If you have multiple telephone sockets for the
same telephone line, the device must be con-
nected to the first telephone socket.
Length of Outgoing Message
The outgoing message must be shorter than ten
seconds. Avoid music in your announcement. If
the external answering machine has a “conserv-
ing function” (i.e. a function that changes the
number of rings as soon as new messages have
been recorded), switch it off.
Answering Machine Records Fax Signals
If the external answering machine records fax
signals, but your device cannot receive faxes, in-
spect the connection of the external answering
machine
