6
Philips · LaserMFD 6135hfd
EN
USB Storage Media
Only use storage media that are compatible with the device.
Only use storage media that are compatible with the de-
vice. Ensure that the power of a USB device does not
exceed the permitted amp limit of the USB connection.
You can only connect
one
high power device (USB 2.0)
to each USB connection. Do not connect additional de-
vices—such as batteries, fans, charging devices—to
your machine. The device only recognises storage media
which are formatted with
FAT16
or
FAT32
.
NTFS
is not
supported.
Never pull out the storage medium while the device is accessing it.
Never pull out the storage medium while the device is
accessing it. This could cause data to be damaged or
lost.
Updating Firmware
When carrying out a Firmware update only use the
Firmware file for your device from the website:
www.philips.com. Using other Firmware files can lead to
your device not functioning properly. Sagemcom ac-
cepts no liability for device malfunctions which can be
traced back to the use of third party Firmware.
GPL Text
The firmware running on the device is partly licensed
under GPL. If you have any questions about the licensing
of a specific part of the firmware, feel free to contact us
on the e-mail address: support.service@sagem-
com.com. We can send you a CD containing the rele-
vant source code for the cost of production.
Consumable Materials
Original Consumable Material
Use only original consumable materials. These are avail-
able from a specialised retailer or through our order
service (see back side of this user manual). Other con-
sumable materials could damage the device or shorten
its service life.
Environment
Dispose of old consumable materials according to the
waste regulations of your country.
Caution when Handling Toner Powder:
Caution when Handling Toner Powder:
If you breathe in toner powder, go into the fresh air im-
mediately. Call a doctor immediately!
If you have swallowed toner powder, drink small
amounts of water. Try
NOT
to vomit. Call a doctor im-
mediately!
If you get toner powder in your eyes, rinse them with a
lot of water for at least 15 minutes. Call a doctor imme-
diately!
Toner Cartridge 1
Never open a toner cartridge. Store both new and used
cartridges in a place where they will not come into the
hands of children.
Paper Jam
In case of a paper jam, remove the paper carefully out of
the device. Throw the paper away carefully: It is possible
that the toner may not be completely set on the print-
out, and toner dust could be released into the air.
If toner dust is released into the air, you should avoid allowing it to contact your skin and eyes.
If toner dust is released into the air, you should avoid al-
lowing it to contact your skin and eyes. Do not inhale
the released toner dust. Remove the toner dust from
clothing or objects with cold water; hot water would
only cause the toner to set. Never remove loose toner
dust with a vacuum cleaner.
Repairs
Danger—Heat!
The fuser unit and and its surroundings inside the device
become hot during operation. Do not touch these parts
if you have opened the device. Proceed with care when
you are removing a paper jam for instance.
Display
Should disruptions occur, follow the instructions on the
display and on the error report.
Repairs
Do not make any repairs to the device yourself. Improp-
er maintenance can result in injuries or damage to the
device. Only have your device repaired by an authorised
service centre.
Do not remove the type label from your device; this
would void the warranty.
Laser Safety
Laser Safety
With specific reference to lasers, the equipment com-
plies with laser product performance standards set by
governmental, national, and international agencies as a
Class 1 Laser Product. The device is designed in such a
way that the user is not exposed to any laser radiation
that exceeds the values for Class 1 under normal oper-
ating conditions and with proper maintenance and use.
Direct (or indirect reflected ) eye contact with the laser
beam might cause serious eye damage. Safety precau-
tions and interlock mechanisms have been designed to
prevent any possible laser beam exposure to the oper-
ator. Only a qualified service technician should open the
device and carry out service operations.
Class 1 Laser Product
Ã
Class 1 Laser Product
