Networks · Setting Up a Wireless Network (WLAN) Manually
49
EN
4. Enter the password for the network.
5. Confirm with
OK
.
Set IP Address Assignment
Introduction
The IP address assignment allows you to select whether
your device's IP address is assigned dynamically by a
DHCP or BOOTP router/server or statically assigned
by the user. You can enter IP addresses, subnet masks,
gateways or two alternative domain name servers
(DNS) for the configuration of the static network con-
nection.
1. Press
C
,
083
and
OK
.
2. Select automatic or manual configuration using
[
.
3. Confirm with
OK
.
This Process May Take a Few Moments.
Set Static IP Address Assignment
Available Function (WLAN)
Enter IP Address
Introduction
The IP address is the address of the device in the net-
work. It must not match the IP address of the computer
or other network components, however it must be lo-
cated in the IP field.
1. Press
C
,
0841
and
OK
.
2. Enter the IP address (for example
192.168.001.×××).
3. Confirm with
OK
.
Entering the Subnet Mask
Introduction
In a network with a gateway or router, the subnet mask
indicates whether the respective data packets are ad-
dressed to an internal recipient in the network or
whether they should be sent to a recipient outside of
the network.
1. Press
C
,
0842
and
OK
.
2. Enter the subnet mask (for example
255.255.255.000).
3. Confirm with
OK
.
Enter IP Address of the Access Point (=
Gateway)
1. Press
C
,
0843
and
OK
.
2. Enter the IP address of the access point (Access
Point, Router).
3. Confirm with
OK
.
Enter Domain Name Server (DNS)
Introduction
The DNS translates IP addresses in the names of inter-
net pages and vice-a-versa. You can enter a primary and
secondary DNS.
Enter Primary DNS
1. Press
C
,
0844
and
OK
.
2. Enter the address of the primary DNS.
3. Confirm with
OK
.
Enter Secondary DNS
1. Press
C
,
0845
and
OK
.
2. Enter the address of the secondary DNS.
3. Confirm with
OK
.
Verify DHCP Settings
Available Function (WLAN)
Introduction
With these functions, you can verify the assigned net-
work settings from your network's DCHP router. You
cannot modify the settings.
Displaying the IP Address
1. Press
C
,
0851
and
OK
.
2. The current IP address is displayed; it is the address
that your device is registered with on the network.
Display Subnet Mask
1. Press
C
,
0852
and
OK
.
2. The subnet mask being used is displayed.
Display IP Address of the Access Point (=
Gateway)
1. Press
C
,
0853
and
OK
.
2. The IP address of the access point (router) is dis-
played.
WEP Key
With 64-bit encryption, the WEP key must
be either 5 characters (ASCII) or 10 num-
bers (hexadecimal). With 128-bit encryp-
tion, the WEP key must be either 13
characters (ASCII) or 26 numbers (hexadec-
imal). You can find the WEP key in the net-
work settings of your PC.
WPA Key
Enter an 8 to 63 character long password.
The password can contain alphanumerical
characters—numbers and letters—and any
other symbol available on the keypad. The
only invalid character is "€” (the euro cur-
rency symbol).
This Process May Take a Few Moments.
The automatic configuration of IP address and
subnet mask on the connected network PCs
may take a moment.
Available Function
This function is only available if you have select-
ed static IP address assignment with the func-
tion
083
.
IP-Address
The first three blocks of numbers refer to
the IP field; this information must match the
IP address on your computer. The last three
digits determine are the individual IP address
of the device. You can enter any number be-
tween 000 and 255. However, this number
must be unique within the network; it may
not be used on any other PC or network
component.
Available Function
This function is only available if you have select-
ed automatic IP address assignment with the
function
083
.