Diagnostic Software
EN 74
HDRW720/0x, DVDR725H/0x
5.
Example
DS:> 2108
210800:
Minimum access time = 9 msec (sector 4822201)
Maximum access time = 41 msec (sector 23668107)
Average access time = 28 msec
999 commands below 50 msec
1 command between 50 and 100 msec
0 commands between 100 and 200 msec
0 commands above 200 mesc
Test OK @
DS:> 2108
210802: Performance failure
Minimum access time = 9 msec (sector 4822201)
Maximum access time = 101 msec (sector 23668107)
Average access time = 35 msec
980 commands below 50 msec
19 command between 50 and 100 msec
1 commands between 100 and 200 msec
0 commands above 200 mesc
Error @
Nucleus Name
DS_HDD_LinearSurfaceScan
Nucleus Number
2109
Description
Perform a linear surface scan so that most of the disc is covered.
Technical
-
Initialise the HDD connection
-
Get the user input
-
Generate a sequence of test sectors according to the user input
-
For every sector in the sequence do
-
Read the sector and measure the time to perform this action
-
Update a list of statistics about the measurement
-
Display statistical information about the test sequence
-
If more than 1% above 100 ms and/or more than 0.1% above 200 msec and/
or requests above 300 msec make the result of the test fail.
Execution Time
Depending on the user input x times 30 seconds
User Input
parameters in the next format:
<SECTORS> <STEP> <LOW> <HIGH> <GRAPH>
- SECTORS: Specifies the number of sectors to read in each access
- STEP: Specifies the step (in sectors) between each access.
- LOW: The start sector address of an explicit range of LBA addresses to be used
for testing. If no value is entered LBA 0 will be used
- HIGH: The end sector address of an explicit range of LBA addresses to be used for
testing. If no value is entered the maximum LBA will be used.
- "GRAPH" optional to print out the measured read scan graph
Example
DS:> 2109
210900:
Minimum access time = 9 msec (sector 4822201)
Maximum access time = 41 msec (sector 23668107)
Average access time = 28 msec
999 commands below 50 msec
1 command between 100 and 200 msec
0 commands between 200 and 300 msec
0 commands above 300 msec
Test OK @
DS:> 2109
210903: Performance failure
Minimum access time = 9 msec (sector 4822200)
Maximum access time = 101 msec (sector 23662200)
Average access time = 35 msec
980 commands below 50 msec
19 command between 100 and 200 msec
1 commands between 200 and 300 msec
0 commands above 300 mesc
Error @
Nucleus Name
DS_HDD_SpinOff
Nucleus Number
2110
Description
Put the HDD in parking position by sending the sleep command so it can be moved
without endangering the mechanical parts
User Input
None
Содержание DVDR725H
