UQIQUE
Digital Voice Recorder
UQ-VR898
Uqique Co., LLC
340 S Lemon Ave #8106
Walnut, CA 91789
United States
This package contains:
• Main Product
• User Manual
• USB Cable Adapter
• Earphones
Attention
Don't disassemble
Don't expose to liquids
Avoid extreme temperatures
Avoid direct sunlight or dust, moisture, steam, soot, etc
TM
Customer Service
For inquiries regarding this product, please contact the authorized
reseller or our support team
at
Our Guarantee to You
• 12-month limited warranty
• Lifetime technical support
For FAQs and more information on the product, please visit:
uqique.com/product-support
Controls
Power On/Off
Microphone
Audio Jack/
USB Port
Record/
Playback
Indicator Light
Volume Up/
Next Audio
Volume Down/
Music or
Recordin
g
Play Mod
e Select
Record/
Playback
Recording
ON
[Start recording]
OFF
[Stop recording]
Toggle the power switch to [ON] and
t
he indicator light glows and blinks in red
few times before going off, the device is now in Recording Mode. With its
intelligent auto-save feature, all recordings are saved instantly. With its optional
voice activated feature, the device will only records when there is any voice or
sound available. Toggle the power switch to [OFF] to stop recording.
Note:
• Upon toggling the power switch to [ON], it takes
approximately
8~10 seconds
before recording
begins.
• Upon toggling the power switch to [OFF] after recording, please wait for
3~
5
seconds for the indicator light to goes off before you turn on the device again.
• To turn on the voice activated feature for recording, press and hold [-] button
while you toggle the power switch to [ON], wait for the indicator light to goes off
before you release the button.
• To check if the status is in Recording Mode, press and hold [+][-] buttons
together; if the indicator light glows and blinks in red one time, this indicates that
recording is in progress.
• The device will not record if earphones are plugged into the Audio Jack/USB Port.
• If memory capacity is full, no further recordings can be made.
• If battery died while recording, all audio until the time of power loss will be saved.
• Due to the sensitivity of the device, hitting or rubbing on it while recording may
cause interference and result in unwanted noise to be recorded.