Philco PD 125 IQ, Руководство пользователя

Страница: 43 / 44

EN -
08/2015 Copyright © 2015, Fast ČR, a. s.
Washing detergent remains in the detergent compartment.
• The washing detergent was wet.
Water is inside the dishwasher at the end of a program.
• The drain hose is clogged or tangled.
• The fi lters are clogged.
• The program has not fi nished yet.
The dishwasher stopped during operation.
• Power supply was cut off .
• Water supply was cut off .
• The program was manually interrupted.
A clapping and banging sound coming out of the dishwasher.
• The dishes are incorrectly arranged.
• Water from the jets is not washing the dishes.
Food remains on the dishes.
• Dishes were incorrectly arranged and so water could not reach certain areas.
• The rack was overfi lled.
• The dishes were touching each other.
• Not enough dishwashing detergent.
• An inappropriate program was selected.
• The jets are clogged.
• The fi lters are clogged.
• The fi lters are incorrectly fi tted.
• The water draining pump is clogged.
There are whitish stains on the dishes.
• Not enough dishwashing detergent.
• The rinsing aid is set to a low level.
• Incorrectly set water hardness.
• Incorrectly set water softener.
• The cap on the salt compartment is not fully closed.
The dishes are not dry.
• You selected a program without drying.
• The rinsing aid is set to a low level.
• You took the dishes out too soon.
Rust remains on the dishes.
• The quality of the stainless steel dishes is insuffi cient.
• High salt concentration in the water.
• The cap on the salt compartment is not fully closed.
• Too much salt was released into the dishwasher while the compartment was being fi lled.
• Incorrect grounding.
If the problem persists, turn off the dishwasher, disconnect the power plug from the socket.