Philco PD 125 IQ, Руководство пользователя

Страница: 26 / 44

EN - 2
08/2015 Copyright © 2015, Fast ČR, a. s.
Monitoring the wash cycle
You can monitor the wash cycle using the indicators on the display (22 - a, b, c, d).
As the wash cycle proceeds, the wash and drying symbols gradually light up. When the drying symbol is lit,
the dishwasher will be quiet for a time of approx. 40-50 minutes.
Do not open the door until the end symbol is lit. When the cycle is fi nished, the end symbol will be lit.
When a selected program is started, you may monitor the time remaining until the end of the wash cycle on
the remaining time indicator.
NOTES:
x
Several minutes after the end of the program is fi nished and the end symbol is lit, you may slightly
open the door and leave it ajar to speed up the drying process.
x
When the dishwasher is stopped by the door being opened or by a power outage during a wash cycle,
then when the door is subsequently closed or when the power supply is resumed, the dishwasher will
recommence from the point where the dishwasher was stopped.
x
If there is a power outage or the door is opened while the dishwasher is in the drying phase, then the
wash cycle will be ended. The dishwasher will be ready for selection of a new wash cycle.
x
Your dishwasher performs the water softening process based on the water hardness setting.
For this reason, for certain wash cycles the initial remaining time may diff er from the time close to
the completion of the cycle. The overall wash cycle time also depends on the room temperature, the
temperature of the supplied water and the amount of dishes.