Philco PD 125 IQ, Руководство пользователя

Страница: 30 / 44

EN - 2
08/2015 Copyright © 2015, Fast ČR, a. s.
6. Reset to factory settings
In order to be able to delete all the settings you performed and to restore factory settings, select "6- Factory
settings" (Restore factory settings) using the up/down buttons. The display will show "6. Factory settings: X"
(X: yes or no). After pressing the confi rm button, activate "X"; you may save your selection by choosing "Yes" or
"No" and then press the confi rm button again. When you restore to factory settings, the dishwasher will restore
the following values:
1- Language:
English
2- Water hardness settings: L3
3- Volume:
L2
4- Brightness: L2
5 -Economy mode: No
7- Energy savings: Yes
7. Energy savings
The energy savings mode activates the door opening system at the end of a wash cycle. The automatic door
opening system provides the required drying eff ect by slowly increasing temperature and lowering power
consumption.
Child lock
You can prevent others from changing the settings that you made while the dishwasher is running. After
starting a wash cycle, simultaneously hold down the up (7) / down (8) buttons for approximately 3 seconds.
The display will show "Keep Pressing..X" (Keep pressing for..X), where "X" indicates how many more seconds
you should hold down the buttons. When this time expires, the child lock will be activated. The display will
show "Child Lock ON" (Child lock is activated) and the indicator (17) will be lit. When the child lock is activated,
all the other buttons will not work.
To cancel the child lock function press and hold the up (7) and down (8) button for 3 seconds. The display will
show "Keep Pressing..X" (Keep pressing for..X), where "X" indicates how many more seconds you should hold
down the buttons. When this time expires, the child lock will be deactivated. The display will show "Child Lock
OFF" (Child lock is deactivated) and the indicator (17) will turn off .