Philco PD 125 IQ, Руководство пользователя

Страница: 21 / 44

EN - 1
08/2015 Copyright © 2015, Fast ČR, a. s.
Adding salt into the salt compartment
Always use salt designed for dishwashers.
The salt compartment is located under the lower rack and you should refi ll it in the following manner.
CAUTION!
Use only salt specifi cally designed for use in dishwashers! Any other kind of salt, which is not
specifi cally designed for use in dishwashers, particularly table salt, would damage the softener
system in the dishwasher. Damage caused by the use of inappropriate salt is not covered by the
manufacturer's guarantee and the manufacturer takes no responsibility for any damages caused.
Add the salt before starting one of the full washing cycle programs. This will prevent salt crystals or
salt water from lying at the bottom of the dishwasher, where this could lead to corrosion.
a) Slide out the lower rack and then unscrew the lid of the salt compartment – see fi g. 1/2.
b) Before the fi rst wash, pour 750 ml of water into the salt compartment.
c) Place the funnel (included accessory) on the opening of the compartment and pour 1 kg of salt into it.
• It is normal for a small amount of water to run out of the compartment.
d) After fi lling the compartment screw the lid back on by turning it in the clockwise direction.
e) You should start a washing program immediately after the salt compartment has been refi lled (we
recommended the rinse or quick wash program). Otherwise the salt water could damage the fi ltration
system, pump and other important parts of the dishwasher. This is not covered by the warranty.
CAUTION!
Only refi ll the salt compartment when the salt warning indicator on the control panel lights up.
Depending on how well the salt dissolves, the warning indicator may stay on even after the salt
compartment has been refi lled. If there is no salt warning indicator on the control panel (on some
models), you can estimate the amount after adding salt to the system by the number of cycles
performed by the dishwasher.
If salt runs out anywhere, remove it by running the rinse program or the quick wash program.