EN - 1
08/2015
Copyright © 2015, Fast ČR, a. s.
PART
: INSTALLATION
Unpacking
Remove the external packaging, remove the protective plastic fi lm from the surface of the appliance
(if used) and clean the external parts of the appliance with an agent designed for this purpose.
Do not use steel wool or any coarse agents, which could irreparably damage the surface of the appliance.
Carefully remove all papers and adhesive tape from the appliance, the door and other parts packed
in polystyrene. Remove documents and accessories from inside the appliance.
The packaging material is recyclable and is marked with a recycling symbol. For disposal, follow the local
regulations. Packaging materials (plastic bags, polystyrene parts, etc.) must be kept out of the reach of children,
because they present a possible source of danger.
Carefully inspect the appliance. If you discover any faults, stop the installation and contact the vendor.
Installation location of the appliance
When selecting the installation location, select a place where it will be easy to load and unload the dishes.
Do not install the dishwasher in a room where the room temperature may fall below 0°C.
Prior to installation, take all packaging materials off the dishwasher and dispose of them properly.
Locate the dishwasher near a water supply and drain connection. You need to take into consideration all
possible connections that cannot be arbitrarily changed.
Do not hold the dishwasher by the door or control panel when placing it.
Leave suffi
cient space on both sides of the dishwasher so that it can be comfortably pulled out and then slid
back into position for cleaning purposes.
Check that there are no water supply or drain hoses crimped during the installation. Also make sure that the
appliance is not standing on the power cord.
Level the appliance using the levelling feet. Correct positioning of the appliance will ensure problem-free
opening and closing of the door.
If the dishwasher door cannot be properly closed, check that the appliance is located on an even fl oor; level
the appliance using the adjustable feet.
Water supply
Make sure that all plumbing works have been completed for the installation of the dishwasher. We also
recommend that you install a fi lter on to the water supply tap to prevent potential water contamination (by
sand, dirt, rust, etc.), which may occasionally occur during an emergency in the water pipes and this will also
prevent yellowing and the formation of unwanted residues on dishes
.
Содержание PD 125 IQ
Страница 1: ...DISHWASHER USER S MANUAL PD 125 IQ...