Phcbi MCO-50ML страница 51 Скачать руководство пользователя

Страница: 51 / 104

OPERATION/ALARM LOG

8. When the export is complete, "Export complete" is displayed [Fig. 6].
Press any key to return to the Alarm Export screen.

Note:

The alarm log data saved in the incubator is not deleted even after

the completion of the export.

*The following messages may appear on the right side of the display:

•

USB flash drive is not inserted into the USB port.

•

USB flash drive is not inserted properly.

Solution: Insert a USB flash drive properly into the USB port.

•There is not enough free space in the USB flash drive.
•The USB flash drive is not formatted in FAT16 or FAT32
format.
Solution: Check the capacity and format type of the USB
flash drive.

•

The specified log data does not exist.

Solution: Specify the data again.

•

The export operation was unsuccessful.

Solution: Specify the data again.

▶

Press any key on the control panel to return to the Alarm Export screen.

9. Remove the USB flash drive from the USB port.

Reference:

"log" folder is created in the USB flash drive and the export file is saved in the folder in CSV

format. The export file name consists of the device ID, date of export, and data name. The date format can
be changed in the settings (see page 78).

(Example) When the device is set to "A00001" and data during Jan. 1, 2019 to Apr. 1, 2019 is exported
with "All" selected:
YY/MM/DD

DD/MM/YY

The oldest alarm log
date - current date

A00001_20190101-20190401_AlarmLog.csv A00001_01Jan2019-01Apr2019_AlarmLog.csv

(Example) When the device is set to "A00001" and the data on Jan. 1, 2019 is exported with "24 Hours"
selected:
YY/MM/DD

DD/MM/YY

Specified date

A00001_20190101_AlarmLog.csv

A00001_01Jan2019_AlarmLog.csv

*If the device ID is not set, the default setting “000000” is used.
*If duplicated file names are used, the data exported later will be overwritten.

10. Press the menu key (MENU/HOME) to display the home screen.



The display returns to the home screen automatically when 90 seconds has passed without any key

operation.

<Right side of the display> [Fig. 6]

Export complete

USB memory is
disconnected

No Data

USB memory is

full

An error occurred

Содержание MCO-50ML









































































































Результаты поиска

Содержание MCO-50ML

Отзывы:

Похожие инструкции для MCO-50ML

Бренды по названию

Популярные бренды

Phcbi MCO-50ML, Руководство по эксплуатации

Результаты поиска

Содержание MCO-50ML

Отзывы:

Похожие инструкции для MCO-50ML

Бренды по названию

Популярные бренды