Phcbi MCO-50ML страница 38 Скачать руководство пользователя

Страница: 38 / 104

BASIC PARAMETERS

Setting O

density

The O

density during the normal operation of the incubator can be set as follows. The incubator

automatically starts operation using these settings after power-on.



Settable range: 1.0 % – 18.0 %, 22.0 % – 80.0 %



Factory setting: OFF

Note:

When operating the incubator for the first time or after not using it for an extended period of time, set

the chamber temperature to the desired temperature and set CO

ON/OFF and O

ON/OFF to “OFF”, then

operate it for at least about 4 hours until the chamber temperature and the CO

sensors become stable.

After that, change the setting to the desired O

density.

1. On the home screen, press the menu key (MENU/HOME).

▶

The left side of the display changes to the Menu screen.

2. When the cursor on the menu screen is on Set Value [Fig. 1], press
the enter key (ENTER).

▶

The display changes to the Set Value screen.

3. On the Set Value screen, move the cursor, to O

Setting [Fig. 2] using

the up/down keys (

△▽

), and press the enter key (ENTER).

▶

The right side of the display changes to the O

Setting screen, and

the current setting value (05.0) is displayed [Fig. 3].

4. Move the cursor using the left/right keys (

◁▷

) and select the digit you

want to change, and then use the up/down keys (

△▽

) to change the

number.

5. Press the enter key (ENTER).

▶

The value is confirmed and the display returns to the Set Value

screen.

*If the entered setting value is out of the settable range, the following
message is displayed on the right side of the display. Press any key on
the control panel to change to the O

Setting screen [Fig. 3].

6. Press the menu key (MENU/HOME) to display the home screen.



The display returns to the home screen automatically when 90 seconds has passed without any key

operation.

Set Value
Temperature

37.0

ON/OFF

: ON

Setting

: 5.0%

ON/OFF

: ON

Setting

: 5.0%

Overtemp

: 53.0

<Right side of the display> [Fig. 3]

Setting

05.0

％

1.0

％−

18.0

％

, 22.0%

−

80.0

％

Menu
      Set Value
      Data Log
      Lock
Alarms & Controls

<Left side of the display> [Fig. 1]

Setting

Invalid Value

Press Any Key

1.0

％−

18.0

％

, 22.0%

−

80.0

％

<Left side of the display> [Fig. 2]

Содержание MCO-50ML









































































































Результаты поиска

Содержание MCO-50ML

Отзывы:

Похожие инструкции для MCO-50ML

Бренды по названию

Популярные бренды

Phcbi MCO-50ML, Руководство по эксплуатации

Результаты поиска

Содержание MCO-50ML

Отзывы:

Похожие инструкции для MCO-50ML

Бренды по названию

Популярные бренды