manualshive.com logo in svg

Phcbi MCO-50ML, Руководство по эксплуатации

Поделиться
Скачать
Phcbi MCO-50ML Скачать руководство пользователя страница 19

19 

INSTALLATION 

 

Note: 

Before connecting a CO

2

 gas cylinder, read the precautions for safe operation on pages 5–9.

 

 

Connecting a CO

2

 gas cylinder 

 

1.

 Prepare a CO

2 

gas cylinder and attach the optional gas regulator MCO-010R. 

Notes:  

• Use a liquefied-CO

2

 gas cylinder (at least 99.5 % pure). The siphon (dip tube) type cannot be used. 

• When MCO-010R is not available, attach a gas regulator rated at 25 MPa(G) (250 kgf/cm

2

(G), 3,600 

psi(G)) for the primary side, and 0.25 MPa(G) (2.5 kgf/cm

2

(G), 36 psi(G)) for the secondary side. 

 

2.

 Connect the connecting port A for the CO

2

 gas pipe and the gas regulator for the CO

2

 gas cylinder using the 

included gas tube

.

 When CO

2

 gas auto-changer MCO-50GC (optional) is installed, refer to page 75 for the 

connection.

 

 
 
 
 
 
 
 
 
 
 

Notes: 

• This product employs a tube fitting. Refer to the following steps to attach and remove the tube. 

(1) Attaching the tube 

Insert the tube all the way to the end so that the tube is secured by the inner locking hook and sealed 
with elastic sleeve around it. 
* In order to make sure that the tube is securely attached, pull the tube after connection. If the tube 
comes off, pull the release ring, and then reconnect the tube and check if it does not become detached. 

(2) Removing the tube 

Disconnect the tube while pressing on the release ring to remove the tube. 

 
• Connecting to the gas regulator (MCO-010R) 

<When connecting to the joint for the gas regulator tube> 

(1) Attach the conversion joint that came with the incubator unit to the gas tube. 
(2) Connect between the joints using the connection tube, and then secure the connection with the 
tube bands. 

 

 
 
 
 
 
 
 
 
 
 

 

Preparation 
of parts 
(Reference) 

Connection tube: 

φ

6 inner diameter/soft polyurethane tube 

Tube bands 

Lower right side 

Connecting port for GAS tube   

Enlarged illustration of the port (tube fitting) 

Connecting port A for CO

2

 gas pipe 

Gas regulator 

Conversion joint (included accessory) 

Tube bands 

Connection tube

 

Gas tube (included accessory) 

Release ring 

Pull 

Release ring

 

Push

 

Содержание MCO-50ML









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды