Phase AxM II 04.09.4, Руководство пользователя

Страница: 56 / 84

58 | Axm ii / AxP Configurable Motion Control Platform
Selecting
Control Panel
you can command the analog and digital input by software.
The drive activates the digital outputs related to its run state.
6.5 PlC APPliCATion uSe
In addition to the basic application, it could be useful to develop additional features. Phase
Motion Control supplies some standard applications (SpeedV and Positioneer) that generally
satisfying the most common control requests.
The use of dedicated applications implies their downloading into the drive only through the
tool LogcLAB.
6.6 FiRmwARe DOWNlOaDINg
Firmware upgrades are periodically available on the web site www.phase.eu.
New functionality and/or software evolution, processing from Phase Motion Control laborato-
ries, are fuse and a new firmware version is released.
To download this, open a system table and select “Load firmware” from “Service” menù; the
follow window will appear:
Input Mark Function Description
Digital 0 DI0 Drive Ok This output is enabled when the drive is on and no
alarms is present.
Digital 1 DI1 Run This output is enabled when the drive activates the
set references.
When you take the
control by control
panel the real input
are not used.
AxM-II (2011-10).indd 58 18/10/11 15:15