Phase AxM II 04.09.4, Руководство пользователя

Страница: 72 / 84

74 | Axm ii / AxP Configurable Motion Control Platform
10.1 imPoRTAnT DIreCTIONS fOr uSe
Appropriate Use
Introduction
PMC products represent state-of-the-art developments and manufacturing. They are tested
prior to delivery to ensure operating safety and reliability.
The products may only be used in the manner that is defined as appropriate. If they are used
in an inappropriate manner, then situations can develop that may lead to property damage
or injury to personnel.
Note: PMC as manufacturer is not liable for any damages resulting from inappropriate use.
In such cases, the guarantee and the right to payment of damages resulting from inappropri-
ate use are forfeited. The user alone carries all responsibility of the risks.
Before using PMC products, make sure that all the pre-requisites for an appropriate use of
the products are satisfied:
» Personnel that in any way, shape or form uses our products must first read and under-
stand the relevant safety instructions and be familiar with appropriate use.
» If the products take the form of hardware, then they must remain in their original state,
in other words, no structural changes are permitted. It is not permitted to decompile
software products or alter source codes.
»
Do not mount damaged or faulty products or use them in operation.
»
Make sure that the products have been installed in the manner described in the relevant
documentation.
Areas of Use and Application
Drive controllers made by PMC are designed to control electrical motors and monitor their
operation. Control and monitoring of the motors may require additional sensors and
actors.
Note: The drive controllers may only be used with the accessories and parts specified in
this document. If a component has not been specifically named, then it may not be either
mounted or connected. The same applies to cables and lines. Operation is only permitted
in the specified configurations and combinations of components using the software and
firmware as specified.
Every drive controller has to be programmed before commissioning, making it possible for
the motor to execute the specific functions of an application. The drive controllers have been
developed for use in single- and multiaxis drive and control tasks.
To ensure an application-specific use, the drive controllers are available with different drive
power and different interfaces.
Typical applications of the drive controllers include:
»
handling and mounting systems,
»
packaging and food machines,
»
printing and paper processing machines and
»
machine tools.
AxM-II (2011-10).indd 74 18/10/11 15:15