PerkinElmer Raman Flex 400 Series, Руководство по началу работы

Страница: 54 / 74

54 . RamanFlex 400 Series Getting Started Guide
11. If you select
Save after each measurement
, your spectra will automatically be saved
using the Sample ID.
12. When you have finished defining your experimental parameters, position your sample as
described in
SOP-5: Sample Positioning when using a Fiber Optic Probe
.
13. Click .
NOTE: The Scan options on the Measurement menu and toolbar are disabled if you are
using a Triggered Fiber Optic Probe. The Scan icons indicate that the Triggered Fiber
Optic Probe is selected as the accessory: . For details of how to acquire data
using a triggered fiber optic probe, see the
Raman Triggered Fiber Optic Probe
leaflet
(L1321940).
Spectra are always background corrected. If there is not a valid background in memory, a
background will be acquired at this point. You will see a progress bar for the background
collection on the Live tab. When the collection of backgrounds is complete, the software will
automatically begin collecting spectra. The upper progress bar shows the progress of the
current scan (
%
), while the lower progress bar shows the overall progress of the
measurement (for example,
1 of 2
scans) if, for example, you have set up Repeat collections.
If you exit Spectrum software the instrument settings will be remembered when you restart
Spectrum, providing that they have been used to collect data. If you want to return to the
default instrument settings, click
Restore Defaults
on the Setup Instrument Basic tab. If you
wish these parameters to be stored as a new set of instrument settings, select Load and
Save on the Setup Instrument Basic tab.
If you would like to export the current instrument settings as a *.REX for use with AssureID,
click
Export
.