![background image](http://html1.mh-extra.com/html/patton-electronics/smartware-r-3-20/smartware-r-3-20_software-configuration-manual_4044387428.webp)
Call router configuration task list
428
SmartWare Software Configuration Guide
33 • Call router configuration
Service or
Option Not
Available
(Cont.)
bearer-capability-not-
available
Drop original call
The network normally provides the
requested bearer capability, but it is
unavailable at the present time. This can
be due to a temporary network problem
or subscription problem.
service-or-option-not-
available
Drop original call
The network or remote equipment cannot
provide the requested service option for
an unspecified reason. This can be a sub-
scription problem.
Service or
Option Not
Implemented
bearer-capability-not-
implemented
Drop original call
The network cannot provide the bearer
capability requested by the user.
channel-type-not-imple-
mented
Drop original call
The network or the destination equipment
does not support the requested channel
type.
facility-not-implemented Drop original call
The remote equipment does not support
the requested supplementary service.
only-restricted-digital-
available
Drop original call
The network cannot provide unrestricted
digital information bearer capability. This
cause indicates that a device has
requested an unrestricted bearer service
but the equipment sending this cause only
supports the restricted version of the
requested bearer capability.
service-or-option-not-
implemented
Drop original call
The network or remote equipment cannot
provide the requested service option for
an unspecified reason. This can be a sub-
scription problem.
Invalid Message invalid-call-reference
Drop original call
The remote equipment receives a call with
a call reference value that is not currently
in use.
channel-does-not-exist
Drop original call
The receiving equipment is requested to
use a channel that is not activated on the
interface for calls. This cause indicates that
the equipment sending this cause has
received a request to use a channel not
activated on the interface for a call.
call-identity-does-not-
exist
Drop original call
This cause indicates that a call resume has
been attempted with a call identity, which
differs from that in use for any presently
suspended call.
Table 16. Hunt group drop causes (Continued)
Class
Cause
Default Behavior
of the Hunt
Group Service
Description
Содержание SmartWare R.3.20
Страница 553: ...553 Appendix A Terms and definitions Chapter contents Introduction 554 SmartWare architecture terms and definitions 554...
Страница 559: ...559 Appendix B Mode summary Chapter contents Introduction 560...
Страница 566: ...566 Appendix D Internetworking terms acronyms Chapter contents Abbreviations 568...
Страница 571: ...571 Appendix E Used IP ports available voice codecs Chapter contents Used IP ports 573 Available voice codecs 574...