Patton electronics SmartWare R.3.20, Руководство по настройке программного обеспечения, Страница: 429 / 573

Call router configuration task list
429
SmartWare Software Configuration Guide
33 • Call router configuration
Invalid Message
(Cont.)
call-identity-in-use
Drop original call This cause indicates that the network has
received a call suspends request. The call
suspend request contained a call identity
which is already in use for a suspended
call within the domain of interfaces over
which the call might be resumed.
no-call-suspended
Drop original call The network receives a call resume request
when there is not a suspended call pend-
ing. This can be a transient error that will
be resolved by successive call retries.
call-has-been-cleared
Drop original call The network receives a call resume
request. This call resume request contains
a call identity that once indicated a sus-
pended call. However, the suspended call
was cleared either by time-out or by the
remote user.
incompatible-destination Drop original call
Indicates that an attempt is made to con-
nect incompatible equipment.
invalid-transit-network
Drop original call This cause indicates that a transit network
identification of an incorrect format was
received.
invalid-message
Drop original call Received an invalid message with no stan-
dard cause.
Protocol Error
mandatory-ie-missing Drop original call The receiving equipment receives a
message that does not include one of the
mandatory information elements. This
cause indicates that the equipment
sending this cause has received a
message that is missing a call property
that must be present in the message before
that message can be processed.
message-type-not-imple-
mented
Drop original call The receiving equipment receives an
unrecognized message, because the mes-
sage type is invalid or the message type is
valid but not supported.
message-type-not-state-
compatible
Drop original call The remote equipment receives an invalid
message with no standard cause. This
cause indicates that the equipment send-
ing this cause has received a message
such that the procedures do not indicate
that this is a permissible message to
receive while in the current call state.
Table 16. Hunt group drop causes (Continued)
Class Cause
Default Behavior
of the Hunt
Group Service
Description