![background image](http://html1.mh-extra.com/html/patton-electronics/smartware-r-3-20/smartware-r-3-20_software-configuration-manual_4044387247.webp)
DHCP-client configuration tasks
247
SmartWare Software Configuration Guide
21 • DHCP configuration
DHCP-server and DHCP-client are illustrated in
figure 38
.
Figure 38. DHCP-client and DHCP-server
DHCP-client configuration tasks
To configure the SmartNode as DHCP-client perform the steps mentioned below.
•
Enable DHCP-client on an IP interface
•
Release or renew a DHCP lease manually (advanced) (see
page 249
)
•
Get debug output from DHCP-client (see
page 249
)
•
Configure DHCP agent
Enable DHCP-client on an IP interface
On every created IP interface a DHCP-client could be enabled. If enabled, the SmartNode gets the IP address
for this interface from a DHCP-server. Additionally other configuration information is received for this IP
Node
Node
WAN
LAN
DHCP Server
DHCP Clients
DHCP Clients
Node
Node
Node
Node
LAN
LAN
DHCP Server
Содержание SmartWare R.3.20
Страница 553: ...553 Appendix A Terms and definitions Chapter contents Introduction 554 SmartWare architecture terms and definitions 554...
Страница 559: ...559 Appendix B Mode summary Chapter contents Introduction 560...
Страница 566: ...566 Appendix D Internetworking terms acronyms Chapter contents Abbreviations 568...
Страница 571: ...571 Appendix E Used IP ports available voice codecs Chapter contents Used IP ports 573 Available voice codecs 574...