![background image](http://html1.mh-extra.com/html/patton-electronics/smartware-r-3-20/smartware-r-3-20_software-configuration-manual_4044387104.webp)
Configuring the local database accounts
104
SmartWare Software Configuration Guide
8 • RADIUS Client Configuration
servers are down or the network is not reachable, you can create an emergency user in the local database so that
you can still access the SmartNode. Perform the following steps to configure the local accounts.
Mode
: Configure
Example
: Create an administrator and an operator account
node>enable
node#configure
node(cfg)#administrator meier password pencil
node(cfg)#operator james password ""
node(cfg)#show accounts
Administrator accounts:
meier
Operator accounts:
james
node(cfg)
Note
If you are creating an account that does not require a password, type "" to
indicate that no password is needed. For example, if you were configuring an
account for an operator named James that did not need a password, the
entry would be:
node(cfg)#operator james password ""
Step
Command
Purpose
1
node(cfg)#[no] administrator
name
pass-
word
password
Adds an administrator account to the local data-
base. The
no
form removes an existing account
2
node(cfg)#[no] operator
name
password
password
Adds an operator account to the local database.
The
no
form removes an existing account
3
node(radius)[name]#shared-secret
authentication
secret
Sets the password shared between the RADIUS
client (the SmartNode) and the remote RADIUS
server.
4
node(pf-auth)[name]#show accounts
Display existing accounts
Содержание SmartWare R.3.20
Страница 553: ...553 Appendix A Terms and definitions Chapter contents Introduction 554 SmartWare architecture terms and definitions 554...
Страница 559: ...559 Appendix B Mode summary Chapter contents Introduction 560...
Страница 566: ...566 Appendix D Internetworking terms acronyms Chapter contents Abbreviations 568...
Страница 571: ...571 Appendix E Used IP ports available voice codecs Chapter contents Used IP ports 573 Available voice codecs 574...