24
TSM DS 50-003/REV.C/031-300-190-003/04-20-07
DS50 TROUBLE SHOOTING MANUAL LEVEL 3
continuation
Return to section 5 and identify the problem.
6. ADJUSTING OVERLOAD CUT OFF FACTOR
Does
the display
indicate >D-RLFCT= n: < ?
Note: n= calibration
value.
NO
YES
Scroll through the lines by pressing the enter key >CR<
until the line is displayed.
Enter your calculated correction factor in % x 100.
Example: +5.00% = +500
--2.75% = -- 275
The correction factor is limited to +/- 500.
Then press the >CR< key to enter the value.
Press the key >K< to return to the start up menu.
Go to section 3.2 and observe the display while you
repeat the cut off test for the actual length step.
Is the
problem corrected
now?
The End
NO
YES
