19
TSM DS 50-003/REV.C/031-300-190-003/04-20-07
DS50 TROUBLE SHOOTING MANUAL LEVEL 3
3.4 THE ON-LINE MODE
The calibration equipment and the system must be switched into on-line mode for
calibration adjustments. From the start up menu, select the on-line mode by pressing
the >O< key. The hand terminal displays the message >SYSTEM READY<. The
operating mode code and the actual length step >OM= 0101, LS = 7.33< confirms
the operation of the on-line mode.
Refer to the example in drawing 3.4.1.
A calibration adjustment is possible for a length step only. A length step is the main
boom length shown in each load chart column.
You can exit the on-line mode any time. Exit the on-line mode by pressing the
>SHIFT< key and then the > ^ < key. The hand terminal confirms with the message
>End online mode<.
Once in the start up display of the on-line mode there are two calibration functions
available.
• Press the >U< key to change calibration data for the actual length step.
• Press the >V< key to change load calibration data for the actual length step.
Refer to the flowchart diagrams of this manual for detailed information how to use
the two calibration functions.
• Press the >K< key to return to the start up menu. Message > End online mode<.
• Press either >U< or >V< key to switch between the two calibration functions.
