Parker PAC, Руководство по установке, Страница: 180 / 197

TROUBLESHOOTING
180 Parker Automation Controller Installation Guide

No applications have been successfully loaded upon startup

The *.app file is missing

I/O system errors occur when copying files from the USB stick drive

An error occurs when restoring the backup NK.bin

An error occurs when copying the default project to the \project folder on the SD card

An error occurs when initializing the retentive memory chip

The retentive memory chip signals an error

An error occurs when copying files to the SD card root directory

The model number is invalid or missing
EtherCAT Connection
There are a variety of reasons for problems with the EtherCAT connection:

The PAC does not find the EtherCAT slave

There is a device conflict

The cable is not connected

There is no XML file
Troubleshoot the following:

EtherCAT Network state

Link activity for the Fieldbus LED

Link activity for the E-Bus
EtherCAT Status LEDs
There are three LEDs located directly below the EtherCAT connector X1.
ECAT Run:

Off The EtherCAT network is off-line.

On The EtherCAT network is running.
E-Bus Link/Act:

Off The E-Bus does not have a link.

On The E-Bus link is detected.

Blinking - The E-Bus link is detected and there is activity.
X1 Link/Act:

Off The EtherCAT fieldbus does not have a link.