Parker PAC, Руководство по установке, Страница: 173 / 197

11. Choose and
12.
13. Choose
14. Right-click on MainTask, choose Add Object and select Program Call.
15. Select the and choose PLC_PRG found in the Application branch then select Add.
16. Right-click on PAC320-xxxx-xx and select Add Device.
17. Set Vendors to expand , expand PROFINET IO Device.
18. Select the NetX PN Device
19. Change t then
choose Add Device and select Close.
20. Right-click PAC_PROFINET in the device tree and choose Add Device.
21. Choose 1 Byte Digital Input and Add Device.
22. Choose 1 Word Digital Input and Add Device then Close.
23. Double-click the 1_Byte_Digital_Input branch and to the right, select the PNIODev-Module I/O
Mapping tab.
24. ouble-click in that same column; the entry for Bit0.
Create the variable name .
25. Double-click the 1_Word_Digital_Input branch and to the right, select the PNIODev-Module I/O
Mapping tab.
26. -click in that same column, the entry for Bit0.
Create the variable name Word .
27. Double-click on PLC_PRG and enter the following text into the worksheet:
PROGRAM PLC_PRG
VAR
SInBitA: BOOL;
END_VAR.
1. Select the graphical ladder portion of the worksheet. Right-clicking in this area
below
the
variables you entered will allow you to enter rungs of logic. (You will see the number 1
displayed in this worksheet area) Choose Insert Contact, select the
above the contact
and then select the . Choose SInBitA then close the menu.
2. Right-click on the rightmost rectangle to the right of the contact you entered and select Insert
Coil
3. Select the above the coil, and expand the IoConfig_Globals_Mapping branch. Select
from the list
4. Using the same method, create another rung below the first.