Paramount Fitness ME II, Руководство пользователя

Страница: 80 / 195

Paramount User Guide
80 | P a g e
Mount Power Switch (On/Off)
This switch turns the mount on (up position) and off (down position).
Power Input (48V Power In)
This port is used to supply power to the mount’s control system. The Electronics Box’s female 48V Power
In port accepts a 2.5 mm Kobiconn DC power plug with a locking collar (Mouser Electronics part number:
171-7395,
http://www.mouser.com ).
The Paramount ME II, Paramount MX, Paramount MX+ and Paramount M
Y
T PSUs use tip positive plugs.
See “Power Supply Unit" on page 112 for more information.
Plugging Power Supply Unit into the Electronics Box
The Paramount MX PSU can be plugged directly into the 48V Power In port on the Electronics Box; the
Paramount ME II and Paramount MX+ requires an additional power extension cable. The table below
describes how to physically connect the PSU of each model from the external power source to the
48V
Power In port (page 80) on the Electronics Box.
Model Connecting PSU to 48V Power In Port Connecting the PSU to
External Power
1. Plug the 4-pin locking male Kycon connector on the PSU into
the female Kycon connector on the Power Supply Extension
Cable.
Figure 41: Paramount ME II PSU plugs into the Power Supply Extension Cable.
Do not attempt to plug the 4-pin Kycon connector on the PSU
into the Electronics Box port labeled Power In.
2. Plug the male Kobiconn DC power plug on the Power Supply
Extension Cable into the port labeled 48 V Power on the
Electronics Box.
Plug the female end of
the Power Cable for the
Power
Supply Unit
(page 45) into the PSU’s
power input. Plug the
male end into an
external power supply
(electrical grid, battery
or suitable other power
source).
Plug the male Kobiconn DC power plug on the Power Supply
Extension Cable into the port labeled
48V Power on the
Electronics Box.
Plug the female end of
the Power Cable for
the Power Supply Unit
(page 45) into the
PSU’s power input.
Plug the male end into
an external power
supply.