2000-A2-GB20-10
- 246 -
February 2004
The table following lists the IAD provisioning parameters on the voice
gateway that identifies the IAD and affects its performance. Verify these
parameters when troubleshooting the IAD.
Table 14–2.IAD Provisioning Parameters
Parameter
Description
ID
Identification number of the IAD (read only)
Serial Number
IAD serial number (read only). Same as MAC
Address
Profile Name
IAD profile name
Interface Group
Identifies the Interface Group that will deliver
the subscriber’s calls.
ATM Protection Group
ATM Protection Group to which the IAD is
assigned.
VPI
Virtual Path Identifier that identifies the
subscriber-specific logical path between the
voice gateway and the ATM network.
VCI
Virtual Circuit Identifier that identifies the
subscriber-specific virtual circuit between the
voice gateway and the ATM network (VCI must
be specific; between 32 and 1023).
Transport
ATM, or Frame Relay
Signalling
Loop Start or Ground Start
Compression
No compression, 32k, or 16k
Echo Cancellation
On or off
Admin
Service state of IAD: locked or unlocked
Operational
State of IAD (read only)
