2000-A2-GB20-10
- 241 -
February 2004
Performing an On/Off Hook Test
The On/Off Hook test reports the hook state of each voice port line.
To perform an On/Off Hook test:
1. Type
O
on the POTS Diagnostics menu to select On/Off Hook Test.
The IAD displays the status of the test as it runs in real time:
2. Press Enter to terminate the test. The IAD displays the POTS
Diagnostics menu.
Display hook state
Legend: .=onhook, ^=offhook, #=ring ground, &=no
ring ground, *=flash hook
Press a key to exit...
1 2 3 4 5 6 7 8
. . ^ . # . * &
