Par T Golf Double Eagle Elite Plus 4, Руководство по установке и обслуживанию

Страница: 27 / 72

PAR T GOLF DOUBLE EAGLE INSTALLATION AND MAINTENANCE MANUAL
SECTION C THE FRAME C7
STRETCH SCREEN TO CANOPY AND FRAME
For proper screen tension, the pre-cut shock cord must be used as described here . After threading each
piece, readjust the cord as needed until the tension is even .
STEP 10 Attach screen to bottom of
frame –
Attach by using the snap connector belts provided.
STEP 11
Attach screen to sides of
frame assembly
–
Locate two pre-cut lengths of shock cord labeled SIDE . Tie shock cord to
the upper frame corner piece at Point F .
–
Using "Method C", unite one side of screen and one side of canopy by
threading cord through wire clips and around the upright frame components
(Points F to E).
–
Repeat same procedures on opposite side of screen, Points G to H.
–
Readjust all shock cord so screen is slightly taught.
STEP 12 Attaching skirt portion of
screen –
Locate shock cord at each end of dark flap or skirt.
–
Slide cord under side of frame, lifting frame if necessary.
–
Secure cord to the bars Item #7 and #8.
– Place the two 2 and 3/8ths inch foam pads under the skirt.
Drawing 5F Assembled Screen