Par T Golf Double Eagle Elite Plus 4, Руководство по установке и обслуживанию

Страница: 25 / 72

PAR T GOLF DOUBLE EAGLE INSTALLATION AND MAINTENANCE MANUAL
SECTION C THE FRAME C5
ATTACH CANOPY AND SCREEN TO UPPER FRAME
STEP 5
Connect canopy to upper
frame assembly –
Spread canopy and screen on the floor inside of the frame assembly, with
buckle-side up.
– Lift canopy up at the front end and wrap its edge around the upper front
frame assembly beginning at Point B and continuing to Point C.
Drawing 5D & 5E
–
Cinch all snap connector belts as tightly as possible along front frame
assembly, and around three sides of the opening.
– Attach connector belts from Points C to G and B to F on each side. Re-
adjust all straps, to assure they are reasobably tight.
STEP 6 Attach screen to upper back
of frame –
Lay the screen on the platform with dark flap (bottom of screen) down. The
dark flap should also be adjacent to bottom frame components.
assembly, using
"Method C" shown – Locate the pre-cut length of shock cord labeled TOP.
in Drawing 5E
– Tie the shock cord to frame at corner piece F as shown in Drawing 5E
–
Unite the top of screen and top of canopy by threading the cord through
grommets, wire clips and around the upper frame assembly using "Method
C". Follow the frame assembly from point
F to point G .
NOTE: Adjust shock cord tension until there are six inches remaining on each end.
Drawing 5D Canopy