Par T Golf Double Eagle Elite Plus 4, Руководство по установке и обслуживанию

Страница: 62 / 72

PAR T GOLF DOUBLE EAGLE INSTALLATION AND MAINTENANCE MANUAL
F8 SECTION F APPENDICES
PROBLEM #3: There is no power to the Control Console .
REASON: Several (see below)
SOLUTIONS:
1. Plug the console in. –
It is possible for the control console to become unplugged. The power
cord is connected at the power supply of the computer and at the wall.
Either end may be unplugged
If this returns power to the Console, you are finished. If not, refer to
solution 2.
2. Check the power to the outlet the
the console is plugged into. –
Sometimes circuit breakers trip and need to be reset or sometimes power is
lost to an outlet for numerous reasons. Check the circuit breaker to ensure
that power is being supplied to the computer module.
If this returns power to the Console, you are finished. If not, refer to
solution 3.
3. Replace the power supply –
Call Optronics for service ….. (801) 486-5407
THE PROJECTOR
Refer to the projector’s troubleshooting guide in the projector manual. For best projector service, call
manufacturer’s customer service line and explain problems thoroughly. They will make repair suggestions
and possibly give you information that is helpful in the repair of warranty or non-warranty issues.
NEC- 1-800-836-0655
NOTE: The projector lamp is NOT covered under warranty, by the manufacturer or by Optronics. Ltd..
Great care should be taken to operate the projector according to the manufacturer’s guidelines. Failure to
due so may result in premature failure of projector components.