Par T Golf Double Eagle Elite Plus 4, Руководство по установке и обслуживанию

Страница: 11 / 72

PAR T GOLF DOUBLE EAGLE INSTALLATION AND MAINTENANCE MANUAL
B2 THE PLATFORM SECTION B
C
hapter
3
P
LATFORM
C
ONSTRUCTION
FRAMING THE PLATFORM
I
n this chapter, the procedure for constructing the platform is outlined. Generally, this phase is most easily
accomplished by first acquiring all necessary materials as outlined in the Bill of Materials, then cutting all of the
lumber, and finally, assembling the pieces in the order outlined below.
STEP 1 Necessary materials – A complete Bill of Material is found below.
Figure 1 – Carefully study Figure 1. Figure 1 outlines each item with its correct
placement. Figure 2 displays an orthographic view of the framed
platform.
BILL OF MATERIALS* — PLATFORM
* All platform members are 2" X 4" (1 1/2" X 3 1/2") [51 x 102mm (38 x 89mm)]
ITEM NO QTY LENGTH / DESCRIPTION
1 1 168” [4267 mm]
2 4 65” [1651 mm]
3 2 68 1/2” [1740 mm]
4 6 161” [4089 mm]
5 4 79 3/4” [2026 mm] LAY ALL 2 x 4s FLAT ON THE FLOOR
6 4 96” [2438 mm]
8 17 20 1/2” [521 mm]
9 5 18 3/4” [476 mm]
10 2 24 1/4” [616 mm]
11 2 44 1/2” [1130 mm]
10 10 48” x 96” x 3/4" (1219 x 2348 x 19 mm) PLYWOOD SHEETS
STEP 2 Cut lumber for the
platform – Cut Items #1 through #10, as described in Figure 1 and bill of materials.
STEP 3 Assemble platform using
1" X 4" metal mending
plates (Optional) – Assemble items #1 through #10 according to the plan specifications. It is
recommended that the platform members be connected using 1" by 4"
metal mending plates (not provided) or by “toe-nailing” members
together. Place notched side DOWN where applicable.
STEP 4 Connect platform to floor
(Optional) –
Using nails, screws or glue, you may want to connect your platform to
the floor to avoid future squeaking and movement.