80
80
81
■
VMD area setting
[Select a preset position]
Select a preset position number to which the VMD area
is to be set, and click the [Start] button. (
☞
Page 82)
When setting an area which is not at the preset position
for the VMD area, select VMD activation in area "except
the preset positions".
[Area]
When selecting a VMD area in the screen, it will be
numbered as area 1. (Subsequent areas will be num-
bered in the order of selection.)
[All areas] button
When the [All areas] button is clicked, the whole area
will become the VMD area, and "1 (White)" will be auto-
matically applied to "Area".
[Status]
Select "On" or "Off" to determine whether or not to
activate each VMD area.
On:
Activates the respective VMD area.
Off:
Inactivates the respective VMD area.
Default:
Off
[Detection area]
Adjust the size of the VMD area using the slider. The
smaller the selected value is, the higher the sensitivity
of VMD area becomes. The current value (1-10) will be
displayed on the right of the slider.
Default:
1
[Detection sensitivity]
Adjust the sensitivity of motion detection in the VMD
area using the slider. The settings can be configured for
each area individually. The larger the value is set, the
higher the sensitivity level becomes.
The current value (1 (low) - 15 (high)) will be displayed
below the slider.
Default:
8
[Delete] button
Click the [Delete] button corresponding to the area to
be deleted. The outline of the selected area will be
deleted.
[Light detection control]
Select "On" or "Off" to determine whether or not to
detect video motion affected by brightness change
such by a dimming level control.
Default:
Off
Important:
• "Light detection control" may not work when bright
-
ness change is too small.
• When "On" is selected for "Light detection control",
the video motion detection may not be performed
even when detecting a subject moving over the
whole screen.
■
VMD information addition
[Information addition]
Select "On" or "Off" to determine whether or not to add
VMD information to superimposed image data.
The VMD information can be searched by some
Panasonic network disk recorders. Refer to the operat-
ing instructions of the connected devices for further
information about the functions and settings.
Default:
Off
