116
116
117
Configure the settings relating to SNMP [SNMP]
Click the [SNMP] tab on the "Network" page. (
☞
Pages 26 and 27: How to display/operate the setup menu)
The settings relating to SNMP can be configured on this page. It is possible to check the status of the camera by
connecting to the SNMP manager. When using the SNMP function, contact the network administrator.
[Community]
Enter the community name to be monitored.
Available number of characters:
0 - 32 characters
Default:
None (blank)
Important:
• When using the SNMP function, it is necessary to
enter the community name. When no community
name is entered, the SNMP function will not work.
[System name]
Enter a system name to be used to manage the camera
with the SNMP function.
Available number of characters:
0 - 32 characters
Default:
None (blank)
[Location]
Enter the name of the location where the camera is
installed.
Available number of characters:
0 - 32 characters
Default:
None (blank)
[Contact]
Enter the mail address or the phone number of the
SNMP manager.
Available number of characters:
0 - 255 characters
Default:
None (blank)
Configure the settings relating to the FTP periodic image trans-
mission [FTP img. trans.]
Click the [FTP img. trans.] tab on the "Network" page. (
☞
Pages 26 and 27: How to display/operate the setup
menu)
The settings relating to the periodic transmission of images to an FTP server can be configured on this page. To
transmit images to an FTP server periodically, it is necessary to configure the settings of the FTP server in advance
(
☞
page 91). Refer to page 118 for descriptions of how to configure schedules of image transmission.
Important:
• Depending on the network line speed or the network traffic, images may not be transmitted at the exact desig
-
nated interval or period.
• Select "FTP error" for "Save trigger" on the [SD memory card] tab when using the FTP periodic transmission
function.
• When "On" is selected for both of the alarm image transmission function and the FTP periodic image transmis
-
sion function, the alarm image transmission function will be given priority over the FTP periodic image transmis-
sion function. For this reason, images may not be transmitted at the exact designated interval or period if alarms
occur frequently.
Note:
• When "FTP error" is selected for "Save trigger" on the [SD memory card] tab, images that have failed to transmit
using the FTP periodic image transmission can be saved automatically on the SD memory card.
(
☞
Page 19)
