Panasonic Toughbook CF-73 Series, Справочное руководство

Страница: 26 / 159

26
Security Measures
NOTE
When the Supervisor Password has not been set, the User Password can not be set.
Set the Supervisor Password if you have not done so. (
page 24 )
To disable the User Password, start up the Setup Utility with the Supervisor Password.
1
Run the Setup Utility. ( page 113 )
2
Using either or

, select [Security].
3
Using either or , select [Set User Password] and press
Enter
.
4
Only when the User Password has been set:
Enter your password at [Enter Current Password] and press
Enter
.
5
Enter your password at [Enter New Password] and press
Enter
.
To disable the User Password
Press only
Enter
.
6
Re-enter your password at [Confirm New Password] and press
Enter
.
To disable the User Password
Press only
Enter
.
7
At [Setup Notice], press
Enter
.
8
Press
F10
and select [Yes], then press
Enter
.
CAUTION
Do not forget your password. If a password is forgotten, you will be unable to use your
computer. If this happens, ask a person who knows the Supervisor Password.
When running the Setup Utility, do not leave your computer even for a short time, as
the possibility exists for the password to be set/changed by another person.
Setting the User Password (enabling, changing, disabling)