Panasonic PT-FW430EA Скачать руководство пользователя

Страница: 27 / 89

ENGLISH -

Getting Started

Connections

Before connecting to the projector

Read carefully the instruction manual for the device to be connected.

Turn off the power switch of the devices before connecting cables.

If any connection cable is not supplied with the device, or if no optional cable is available for connection of the

device, prepare a necessary system connection cable to suit the device.

Video signals containing too much jitter may cause the images on the screen to randomly wobble or wafture.

In this case, a time base corrector (TBC) must be connected.

The projector accepts the following signals: VIDEO, S-VIDEO, analogue-RGB (with TTL sync. Level) and

digital signal.

Some computer models are not compatible with the projector.

When using long cables to connect with each of equipment to the projector, there is a possibility that the image

will not be output correctly unless a compensator is used.

For details on what video signals the projector supports, see “List of compatible signals”. (

page 83)

Connecting example

ロモワ

リワ

ュヷリノリチリワ

ヤヰヮヱヶヵユンチリワ

ヷリュユヰ

リワ

モヶュリヰチリワ

ヤヰヮヱヶヵユン

モヶュリヰチリワ

ヴユンリモロチリワ

ヒ

ビ

ヮモリワ

ヱヰヸユン

ヰワ

ヰョョ

モヤチリワ

ロ

ン

ヴノヷリュユヰチリワ

ヷモンリモャロユ

モヶュリヰチヰヶヵ

Attention

When connecting with a video deck, be sure to use the one with a built-in time base corrector (TBC) or use a TBC between

the projector and the video deck.

If nonstandard burst signals are connected, the image may be distorted. If this is the case, connect a TBC between the

projector and the video deck.

Note

When using an HDMI cable, check that it is compliant with the HDMI standard. Using a cable that is not compliant with the

HDMI standard may result in problems such as the image cutting out or not appearing.

When connecting the 1 080p signal using HDMI, use a cable compliant with 1 080p signal.

It is possible to connect the HDMI input terminal with an external device having a DVI terminal using an HDMI/DVI

conversion cable, but with some devices the images may not appear or other problems may occur. (

page 50)

It is possible to connect the DVI-I input terminal with an HDMI- or DVI-I compliant device, but with some devices the images

may not appear or other problems may be encountered in operation. (

page 50)

When [AUDIO IN SELECT] is not set correctly, sound may not be heard and other problems may occur. (

page 61)

This projector does not support the Viera link (HDMI).

The DVI-I input terminal (digital signal input ) supports only a single link.

For the specifications of the RGB signals that can be applied from the PC, refer to “List of compatible signals”. (

page 83)

If your computer has the resume feature (last memory), the computer may not function properly until the resume capability

is disabled.

When the SYNC ON GREEN signal is input, do not input sync signals to the SYNC/HD and VD terminals.

When using the DVI-I input terminal (digital signal input ), EDID settings may be required for some connected devices.

(

page 50)

See “Network operation” in the instruction manual on the supplied CD-ROM for the details of wired LAN and wireless

communication between the projector and the computer.

Audio system

Video deck

(TBC built-in)

Blue ray disk player with HDMI

terminal

Control computer

Computer (Digital)

Control computer

Computer

Computer (Analog)

Содержание PT-FW430EA


























































































Результаты поиска

Содержание PT-FW430EA

Отзывы:

Похожие инструкции для PT-FW430EA

Бренды по названию

Популярные бренды

Panasonic PT-FW430EA, Руководство по эксплуатации

Результаты поиска

Содержание PT-FW430EA

Отзывы:

Похожие инструкции для PT-FW430EA

Бренды по названию

Популярные бренды