Panasonic Minas A4 Series, Инструкция по эксплуатации

Страница: 15 / 366

13
[Before Using the Products]
Before Using
the Products
Guideline for Parts Replacement
Use the table below for a reference. Parts replacement cycle varies depending on the actual operating
conditions. Defective parts should be replaced or repaired when any error have occurred.
Driver
Motor
Motor with
gear reducer
Smoothing capacitor
Cooling fan
Aluminum electrolytic
capacitor (on PCB)
Rush current
preventive relay
Rush current preventive
resistor
Bearing
Oil seal
Encoder
Battery
for absolute encoder
Gear reducer
Product Component
Standard replacement
cycles (hour)
Note
These hours or cycles are
reference.
When you experience any
error, replacement is required
even before this standard
replacement cycle.
Approx. 5 years
2 to 3 years
(10,000 to 30,000 hours)
Approx. 5 years
Approx. 100,000 times
(depending on working
condition)
Approx. 20,000 times
(depending on working
condition)
3 to 5 years
(20,000 to 30,000 hours)
5000 hours
3 to 5 years
(20,000 to 30,000 hours)
Life time varies depending
on working conditions.
Refer to the instruction
manual attached to the
battery for absolute
encoder.
10,000 hours
Prohibited
Disassembling for inspection and repair should be carried
out only by authorized dealers or service company.