6-3. Display Turning Function
Turn OFF
This function can be used to invert the display orientation, according to the direction of amplifier installation.
Turn ON
When turn ON
Press the
MODE key 5 times.
Turn the Jog switch twice
toward the ‘
Ⳮ
’ direction.
Turn the Jog switch once
toward the ‘
Ⳮ
’ direction.
Press the
Jog switch.
Press the
Jog switch.
Press the
Jog switch.
Select the desired display orientation
by turning the Jog switch.
The digital display will quickly
blink to confirm the setting.
Press the
MODE key once.
Press the
MODE key once.
5
If the [Jog switch] is pressed, the current ‘display orientation’
(red) will be displayed.
* The factory setting is Turn OFF.
6
If the [Jog switch] is turned, display orientation (red) will blink
on the digital display.
Select the desired ‘display orientation’.
7
If the [Jog switch] is pressed, display orientation (red) will
quickly blink on the digital display, and the selected ‘display
orientation’ will be confirmed.
The digital display will not blink (red) if the setting has not
been changed.
4
Turn the [Jog switch] once toward the ‘
Ⳮ
’ direction, to enter
the ‘display turning setting’ state.
9
Press the [MODE key] once, the amplifier will return to ‘RUN
mode’ (normal sensing operation).
To return the display to the original state, select the setting
‘Turn OFF’.
8
If the [MODE key] is pressed once, the amplifier will return to
‘PRO2 mode’.
3
Press the [Jog switch] to enter the ‘display switching’ state.
2
Turn the [Jog switch] twice toward the ‘
Ⳮ
’ direction, to
select ‘PRO2 mode’.
1
Press the [MODE key] 5 times to select ‘PRO mode’.
33
Ramco National
(800) 280-6933
www.panasonicsensors.com
