5-6. Emission Halt Function
This selects whether the laser is emitted or not.
* This only stops laser emission, and other operations (such as output operation and timer operation) continue functioning.
Press the
MODE key 5 times.
Press the
Jog switch.
Press the
Jog switch.
Press the
Jog switch.
Laser emission
OFF
Laser emission
ON
Turn the Jog switch once
toward the ‘
’ direction.
Turn the Jog switch
4 times toward
the ‘
’ direction.
Press the
MODE key once.
Press the
MODE key once.
The digital display will quickly
blink to confirm the setting.
Select the desired laser emission state
by turning the Jog switch.
3
Press the [Jog switch] to enter the ‘response time change’
state.
8
If the [MODE key] is pressed once, the amplifier will return to
‘PRO1 mode’.
9
Press the [MODE key] once, the amplifier will return to ‘RUN
mode’ (normal sensing operation).
4
Turn the [Jog switch] 4 times toward the ‘
’ direction, to
select ‘emission halt setting’.
5
If the [Jog switch] is pressed, the current ‘laser emission
state’ (red) will be displayed.
* When the power is turned on, laser emission is set to ON.
(The setting is not stored.)
6
If the [Jog switch] is turned, laser emission state (red) will
blink on the digital display.
Select the desired ‘laser emission state’.
7
If the [Jog switch] is pressed, laser emission state (red) will
quickly blink on the digital display, and the selected ‘laser
emission state’ will be confirmed.
The digital display will not blink (red) if the setting has not
been changed.
2
Turn the [Jog switch] once toward the ‘
’ direction, to select
‘PRO1 mode’.
1
Press the [MODE key] 5 times to select ‘PRO mode’.
29
Ramco National
(800) 280-6933
www.panasonicsensors.com
