Full-auto teaching is used to set the threshould value while the sensing objects are still moving on
the production line, without stopping the production line.
Full-Auto Teaching
Place a sensor head within sensing range.
Press the
MODE key once.
Hold down the
Jog switch.
Status condition-moving the production line
Difference between incident light
intensities is not great enough.
Stable sensing
Press the
MODE key 5 times.
1
Select ‘TEACH mode’ by pressing the [MODE key] once.
2
Hold down the [Jog switch] for 0.5 sec. or more when in the
status condition when the object moving on the production
line.
4
Incident light intensity (red) will blink on the digital display,
and the ‘threshold value’ will be set to a value midway
between the incident light intensities when the sensing
object is present and when it is absent.
5
The set ‘threshold value’ (green) will indicate and the
judgement on the stability of sensing will be displayed.
•
When stable sensing can be performed
n
The digital display will blink the word ‘ ’ (red).
•
When stable sensing cannot be performed
n
The digital display will blink the word ‘ ’ (red).
3
‘ ’ (green) is displayed on the digital display, then the
MODE indicator / TEACH (yellow) will blink. Release the jog
switch when the object has passed.
7
By pressing the [MODE key] 5 times , the amplifer will return
to ‘RUN mode’ (nomal sensing operation).
6
The incident light intensity (red) will again be displayed,
indicating that configuration is now complete.
13
Ramco National
(800) 280-6933
www.panasonicsensors.com